Networking with ProScore and Publishing to MeetScoresOnline

If you are running ProScore Scoregen and/or iPads connected over your internal network with a router and are not able to publish to MSO because you do not know how to also connect to the internet, please follow the below instructions. You wil be setting up a static IP address from your PC to your router to do this.

Required: You will need to be hardwired to the router you are using internally to run ProScore scoreboards and iPads and you will need a secondary wireless hotspot or wireless access with internet access to connect to.

Instructions On Your PC

1. In Windows
2. CLICK - WINDOWS KEY | SETTINGS
   You should see this
   
3. Under Network & Internet
4. CLICK - Ethernet
   You should see this
   
5. Under Related settings
6. CLICK - Change adapter options
   You should see this
   
   
7. REPEAT THESE STEPS FOR WIFI and ETHERNET CONNECTIONS
   NOTE: WIFI METRIC IS 10, ETHERNET METRIC IS 20
1. RIGHT CLICK - the connection
2. CLICK - Properties
   You should see something like this
   
   BEFORE CONTINUING, PLEASE TAKE A SNAPSHOT OR WRITE DOWN YOUR EXISTING SETTINGS. YOU WILL NEED TO RESTORE THESE SETTING IF YOU ENCOUNTER ANY ISSUE WITH THESE CHANGES.
3. CLICK - Advanced
   You should see this
   
4. UNCHECK - Automatic metric
5. INPUT METRIC - type in correct metric as mentioned above
6. CLICK - OK